|
| |
New York Cost Estimator
Developing cost estimates during the planning phase can help planners provide
important information to aid in decisions when working with conservation plans. The New York
Cost Estimator provides cost estimates that a customer can use during the planning
phase of the practice, system or project to determine estimated total
implementation costs.
Cost estimates are derived from RS-Means data and local data for selected zip
codes. The output includes an estimate of the total implementation costs, a
contractor estimate sheet and a bill of materials sheet.
New York is divided into six Soil and Water Conservation Committee Regions. A
specific cost estimator spreadsheet is available for each region.
These files require
Microsoft
Excel.
New York State Soil and Water Conservation Committee
Regions
|
Region |
Counties in Region |
Date |
Download
Microsoft Excel spreadsheet |
| Region 1 |
Allegany,
Cattaraugus, Chautauqua, Erie,
Genesee, Livingston, Niagara, Ontario, Orleans, Schuyler, Steuben,
Wyoming,
Yates |
6/07 |
XLS; (3.6 MB) |
| Region 2 |
Broome, Chemung,
Chenango, Cortland, Delaware, Otsego, Tioga, Tompkins, Sullivan |
6/07 |
XLS; (3.6 MB) |
| Region 3 |
Cayuga, Herkimer, Jefferson, Lewis, Madison, Monroe, Oneida,
Onondaga, Oswego, Seneca, Wayne |
6/07 |
XLS; (3.6 MB) |
| Region 4 |
Clinton, Essex, Franklin, Hamilton, St. Lawrence, Saratoga, Warren,
Washington |
6/07 |
XLS; (3.6 MB) |
| Region 5 |
Albany, Fulton, Montgomery, Rensselaer, Schenectady, Schoharie |
6/07 |
XLS; (3.6 MB) |
| Region 6 |
Bronx, Columbia, Dutchess, Greene, Kings, Nassau, New
York, Orange, Putnam, Queens, Rockland, Suffolk, Ulster, Westchester |
6/07 |
XLS; (3.6 KB) |
Disclaimer - As with any engineering software, the use of these programs,
or information on this site, is not a replacement for a professional
engineering evaluation of the situation. On-line software is meant for
conservation practice planning and design and is in no way a replacement for
a thorough engineering review. A professional engineer, licensed in the
appropriate field of engineering, or an employee with the Job Approval
Authority, should always conduct the final evaluation of the application.
That individual is responsible for the final engineering design and
performance of the application at hand. The software is supplied "as is" and
NRCS specifically excludes warranties, expressed or implied, as to the
accuracy of the data generated by the use of this program and does not
assume liability for any losses or damage resulting form the use of this
program or the information supplied with it. NRCS does not warrant,
guarantee, or make any representations regarding the use, or the results of
use, of this software or accompanying information in the terms of its
accuracy, validity, completeness, applicability, or compliance with any
regulatory code or governmental laws and regulations. Use of this software
and information involves some risks, and the entire risk as to the results
and performance of the software and accompanying information is your own
responsibility and liability.
Contact Information
If you have questions or need assistance with the Cost Estimator,
please contact:
Civil Engineer (AEM)
Ronald Young
Syracuse, New York
Telephone: 315-477-6545
You may send comments regarding this web site to:
State Conservation Engineer
Peter E. Wright
Syracuse, New York
Telephone: 315-477-6538
If you encounter any problems with files provided on this page, have questions, suggestions, or find a broken link, please contact Gary Vandawalker
at 315-477-6546.
 Back to
Top
< Back to NRCS New York Engineering homepage | |
|
About Us
