United States Department of Agriculture
Natural Resources Conservation Service		 New York Go to Accessibility Information
Skip to Page Content





Revisions to Engineering Standard Job Sheets and Standard Details

Concrete

This section of the New York NRCS Conservation Engineering web page provides explanations of the revisions to Standard Job Sheets and Standard Details.

May 3, 2006

Job Sheets NY-ENG-JS101-1A through NY-ENG-JS101-6C, Concrete Pad, have been replaced by Job Sheets
NY-ENG-700A through NY-ENG-700O, Concrete Slab. Several revisions have been made.

NY Bulletin NY180-06-05 has been issued as a result of the revisions.

Explanation of Revisions

NY-ENG-700A

Released May 2006 to replace NY-ENG-JS101-1A, with the following revisions:

  • Contraction joint revised to construction joint.
  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700B

Released May 2006 to replace NY-ENG-JS101-1B, with the following revisions:

  • Contraction joint revised to construction joint.
  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700C

Released May 2006 to replace NY-ENG-JS101-2A, with the following revisions:

  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Contraction joint depth corrected to 1 ¼ ".
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700D

Released May 2006 to replace NY-ENG-JS101-2B, with the following revisions:

  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700E

Released May 2006 to replace NY-ENG-JS101-3A, with the following revisions:

  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Contraction joint depth corrected to 1 ¼ ".
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700F

Released May 2006 to replace NY-ENG-JS101-3B, with the following revisions:

  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Contraction joint depth corrected to 1 ¼ ".
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700G

Released May 2006 to replace NY-ENG-JS101-4A, with the following revisions:

  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700H

Released May 2006 to replace NY-ENG-JS101-4B, with the following revisions:

  • Construction Specifications and Notes, Item 4: Minimum protective cover from earth surfaces or from gravel subbase revised to 2 ½ inches.
  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Construction Specifications and Notes, Item 11 added: Variation of NRCS New York Specification (01) Concrete 832 , minimum protective cover from earth surfaces, as per New York Bulletin NY210-05-01, dated January 19, 2005
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700I

Released May 2006 to replace NY-ENG-JS101-4C, with the following revisions:

  • Typographical error in titleblock corrected. 5 inches changed to 6 inches.
  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Welded wire fabric sheet changed from W2.9xW.29 to W7xW7
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700J

Released May 2006 to replace NY-ENG-JS101-5A, with the following revisions:

  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700K

Released May 2006 to replace NY-ENG-JS101-5B, with the following revisions:

  • Construction Specifications and Notes, Item 4: Minimum protective cover from earth surfaces or from gravel subbase revised to 2 ½ inches.
  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Construction Specifications and Notes, Item 11 added: Variation of NRCS New York Specification (01) Concrete 832 , minimum protective cover from earth surfaces, as per New York Bulletin NY210-05-01, dated January 19, 2005
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700L

Released May 2006 to replace NY-ENG-JS101-5C, with the following revisions:

  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Welded wire fabric sheet changed from W2.9xW.29 to W7xW7
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700M

Released May 2006 to replace NY-ENG-JS101-6A, with the following revisions:

  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700N

Released May 2006 to replace NY-ENG-JS101-6B, with the following revisions:

  • Contraction joint revised to construction joint.
  • Construction Specifications and Notes, Item 4: Minimum protective cover from earth surfaces or from gravel subbase revised to 2 ½ inches.
  • Construction Specifications and Notes, Item 5: Expansion joints revised to Isolation joints.
  • Construction Specifications and Notes, Item 10 added: Variation of NRCS New York Specification (01) Concrete 832 , minimum protective cover from earth surfaces, as per New York Bulletin NY210-05-01, dated January 19, 2005
  • Conditions for Use statement added.
  • Slab design loading data added.
NY-ENG-700O

Released May 2006 to replace NY-ENG-JS101-6C, with the following revisions:

  • Contraction joint revised to construction joint.
  • Construction Specifications and Notes, Item 4: Expansion joints revised to Isolation joints.
  • Welded wire fabric sheet changed from W2.9xW.29 to W7xW7
  • Conditions for Use statement added.
  • Slab design loading data added.


 

Contact Information

You may send comments regarding this Web site to:

State Conservation Engineer

Peter E. Wright
Syracuse, New York
Telephone: 315-477-6538

If you have questions, suggestions, or find a broken link, please contact Gary Vandawalker at 315-477-6546.

alt=""Back to Top

< Back to Concrete drawings