Additional Hatch Patterns

Save the hatch pattern (.pat) files in the following directory: c:\program files\land desktop 3\support. Your path may vary depending on the version of Land Desktop you are operating.

This is a compressed .zip file. It requires Winzip or a similar program to decompress.

The decompressed files require AutoCAD.

hatchpatterns (ZIP; 23 KB)

The following hatch pattern files are contained in the .zip file:

Stone1-6
Concrete1
Concrete2
Sand1
Soil1
Earth1
Fill1
Texture1-5
Water1
Water2
Grass1
Wood1-6
Boardnailed
Logend1

The file below provides a preview of the additional hatch patterns.

This document requires Adobe Reader.

hatch patterns  (PDF; 69 KB)

In AutoCAD, user defined hatch patterns can be accessed by the following method:

• In the Boundary Hatch dialog box, select User Defined from the Type pull down window.

• Select the Swatch pull down window to view the list of available patterns.

If you have a program setting or customization that you would like to share with other users via this Web site, you may contact Gary Vandawalker.

Contact Information

You may send comments regarding this Web site to:

State Conservation Engineer

Peter E. Wright
Syracuse, New York
Telephone: 315-477-6538

If you encounter any problems with files provided on this page, have questions, suggestions, or find a broken link, please contact Gary Vandawalker at 315-477-6546.

Back to Top

< Back to Program Settings and Customization - Add-on Files